UNCLASSIFIED  INNOLAS  IMPALA MULTIPIN  USED

DESCRIPTION:
Lot 1490054: INNOLAS Mechanical structuring system Impala MultiPin, new 2009 The machine is a CNC - controlled machine for mechanical scribing of thin - film solar cells. The mechanical scoring heads move over the CIS (copper-indium-sulfide) coated glass pane and create an insulating track by removing material. The Impala Scriber System is designed for mechanical scribing of thin-film solar cells. Scoring needles are used as tools and are guided over the workpiece by means of CNC-controlled linear motors. The CNC control controls the movement of the X, Y, Z, A, B and U axes. Technical specifications • Voltage: 400 VAC, 3Ph + N + PE, 50/60 Hz + 5% -10% • Power consumption max./average: 3 kVA, 2 kVA • Fusing: 32 A per phase, characteristic T (TT) Cooling water: • Waste heat generation: Max 3.5 kW • Operating pressure: 3 -6 bar • Flow rate: min .: 16 l / min; • Differential pressure: min. 3 bar • Water temperature: min 20 ° C; max. 22 ° C, non-condensing • Permissible temperature deviation: +/- 2 ° C • Connection dimension: 1/2 “fittings each for flow / return • Ambient temperature: 20 ° C - 30 ° C Compressed air: • Type: compressed air • Inlet pressure: min. 6 bar / max. 8 bar • Consumption: typ. 150 l / min, peak: 250 l / min • Air quality: according to ISO 8573-1 class 3 • Connection size: 1x plug connector NW 16mm (OD) type Festo Extraction connections (cabin): • Volume: min. 600 m3 / h • Recommended negative pressure: 60 mbar • Connection dimensions: DN 100 (110x5) cabin • Filter: Booth exhaust not filtered